Once in place the holes didn't quite line up where I wanted to place it, but a few minutes with a drill fixed that. The existing holes we closed off with some blind grommets.
and then the tray was bolted down.
As one of the batteries was taller than the tray was designed for a, spacer was needed between the smaller battery on the right and the clamp bar. Also a piece of threaded bar was used to replace bolt on the left which was too short.
In all it was 30 minutes well spent. Firstly the battery terminals won't touch the body work and cause a fire, and secondly it will pass scrutineering at the next event.
No comments:
Post a Comment